• Ideal product for all areas of uses including HealthCare areas, non-HealthCare areas and food sectors
• Full virucidal
• Fast kill claims for a broad spectrum of viruses, bacteria and yeasts
• Superior Cleaning with high-performance surfactant system
• Fragrance free
• No rinsing required
• Active substance breaks down into water and oxygen
• BPR approved biocide
• Certified medical device

• Oxivir Excel Acti provides broad spectrum efficacy against bacteria, yeasts and viruses in short contact times providing the highest levels of disinfection against multiple pathogens of concern
• BPR approved and extensively tested against European Norms
• Oxivir Excel Acti carries a full virucidal claim including proven efficacy against non-enveloped viruses such as Polio, Adeno, Murine Norovirus and enveloped viruses such as Coronavirus, Vaccinia virus, HIV, HBV, HCV and Influenza
• Oxivir Excel Acti has a superior cleaning performance due to the powerful surfactants which make it not only an excellent disinfectant but also an excellent cleaner
• AHP formulation is gentle on surfaces extending equipment life and leaving no harsh residues on the surface
• Oxivir Excel Acti is suitable for daily use cleaning & disinfection hard surfaces as well as for use in high touch areas in retail, education, foodservice areas, long term care and other sectors as well as high risk areas in hospitals such as OR, ICU, NICU & patient rooms

Product must be used with cold water only, use at room temperature.
For packs with manual dilution system:To prevent foaming, fill a container or a foaming spray bottle three quarters full of cold water. Add the correct amount of the concentrated product to reach the dilution the dilution given in the table below according to the container size used. Carefully fill up with the rest of the water. Remove gross soils. Apply the diluted product by:

• Spraying with a foam trigger directly on the surface or on a clean cloth. Optionally wipe to spread the solution.
• Dipping the mop into the container. Squeeze the surplus solution. Clean and disinfect the floor with the wet mop.
• Soaking the cloth or sponge in the solution. Distribute the liquid on the surface. Make sure to wet the surface completely.
• Cover dipping bath with a lid after placing the objects in the disinfection solution (not applicable for medical devices), ensure that items to be disinfected are fully submerged in the solution.

Allow to act for 5 minutes. Let it air dry. No rinsing needed after disinfection.

For packs with (semi-)automatic dilution system with 2 settings: Select the right setting on the dosing equipment. Fill a container with the diluted product and follow the instructions given below.
Preparing moist wipes: Prepare 1,5L dilution by adding 75 ml Oxivir Excel Acti to 1,425 litres of cold water. Apply the dilution into the bucket. Close the bucket. Ensure the wipe is properly impregnated with the solution. Open the lid and take a single wipe (only use wet wipes). Close the lid.

For HealthCare area:

Application method	Specified area	Concentration	Contact time	Application rate	Frequency in time(s) per day
Mopping with a soaked mop ( incl. the use on medical devices)	n.a.	bacteria, yeast, viruses: 4.5%	5 min	11 - 40 mL/m²	7
Spreading with a soaked cloth ( incl. the use on medical devices)	n.a.			11 - 40 mL/m²	7
Spraying using a foam trigger (optional: wipe to spread the solution)	toilets & bathrooms			11 ml/m²	4
	hospitals & medical practices				8
	laboratories				10
	cleanrooms				10
Soaking or dipping in the solution (not for medical devices)	n.a.			up to 3 L	1
Wipping with prepared moist wipes	n.a.	bacteria, yeast, viruses: 5%	5 min	1.5 m²	8

For Non-HealthCare area: 

Mopping with a soaked mop	n.a.	bacteria 1,5%, yeasts 3,75%, viruses 2%	5 min	11 - 40 mL/m²	7
Spreading with a soaked cloth	n.a.			11 - 40 mL/m²	7
Spraying using a foam trigger (optional: wipe to spread the solution)	toilets & bathrooms			11 ml/m²	4
	cosmetic/pharmaceutical manufacturing facilities				8
	laboratories				10
	cleanrooms				10
Soaking or dipping in the solution	n.a.			up to 3 L	1

For Food Contact area:

Mopping with a soaked mop	n.a.	bacteria, yeast, viruses: 3.75%	5 min	11 - 40 mL/m²	7
Spreading with a soaked cloth	n.a.			11 - 40 mL/m²	7
Spraying using a foam trigger (optional: wipe to spread the solution)	kitchens & canteen			11 ml/m²	4
	food processing industries				4
	counter in a shop/supermarket				8
Soaking or dipping in the solution	n.a.			up to 3 L	1
Wipping with prepared moist wipes	n.a.	bacteria, yeast, viruses: 5.0%	5 min	1.5m²	28