Product must be used with cold water only, use at room temperature.
For packs with manual dilution system: To prevent foaming, fill a container or a foaming spray bottle three quarters full of cold water. Add the correct amount of the concentrated product to reach the dilution given in the table below according to the container size used. Carefully fill up with the rest of the water. Add the concentrated product to the water to avoid splashes of concentrated product. Remove gross soils.
Apply the diluted product by:
- Spraying with a foam trigger directly on the surface or on a clean cloth. Optionally wipe to spread the solution.
- Dipping the mop into the container. Squeeze the surplus solution. Clean and disinfect the floor with the wet mop.
- Soaking the cloth in the solution. Distribute the liquid on the surface. Make sure to wet the surface completely.
- Cover dipping bath with a lid after placing the objects in the disinfection solution (not applicable for medical devices), ensure that items to be disinfected are fully submerged in the solution. The solutions for soaking or dipping can be used only once.
Allow to act for 5 minutes. Let it air dry. No rinsing needed after disinfection.
For packs with (semi-)automatic dilution system with 2 settings: Select the right setting on the dosing equipment. Fill a container with the diluted product and follow the instructions given below.
Preparing moist wipes: Prepare 1,5L dilution by adding 75 ml Oxivir Excel Acti to 1,425 liters of cold water. Apply the dilution into the bucket. Close the bucket. Ensure the wipe is properly impregnated with the solution. Open the lid and take a single wipe (only use wet wipes). Close the lid.
For HealthCare area:
| Application method | Specified area | Concentration | Contact time | Application rate* |
|---|
|
|
| Mopping with a soaked mop (incl. the use on medical devices) | n.a. | bacteria, yeast, viruses: 4.5% | 5 min | 11 - 40 mL/m² |
| Spreading with a soaked cloth (incl. the use on medical devices) | n.a. | 11 - 40 mL/m² |
Spraying using a foam trigger (optional: wipe to spread the solution)
(incl. the use on medical devices) | toilets & bathrooms | 11 mL/m² |
| hospitals & medical practices |
| laboratories |
| cleanrooms |
| Soaking or dipping in the solution (not for medical devices) | n.a. | up to 3 L |
| Wiping with prepared moist wipes (not for medical devices) | n.a. | bacteria, yeast, viruses: 5% | 5 min | 1.5 m² |
*Application rate: Amount of liquid to take the surface fully wet during the contact time
For Non-HealthCare area:
| Application method | Specified area | Concentration | Contact time | Application rate* |
|---|
| Mopping with a soaked mop | n.a. | bacteria 1,5%, yeasts 3,75%, viruses 2% | 5 min | 11 - 40 mL/m² |
| Spreading with a soaked cloth | n.a. | 11 - 40 mL/m² |
| Spraying using a foam trigger (optional: wipe to spread the solution) | toilets & bathrooms | 11 mL/m² |
| cosmetic/pharmaceutical manufacturing facilities |
| laboratories |
| cleanrooms |
| Soaking or dipping in the solution | n.a. | up to 3 L |
*Application rate: Amount of liquid to take the surface fully wet during the contact time
For Food Contact area:
| Application method | Specified area | Concentration | Contact time | Application rate* |
|---|
| Mopping with a soaked mop | n.a. | bacteria, yeast, viruses: 3.75% | 5 min | 11 - 40 mL/m² |
| Spreading with a soaked cloth | n.a. | 11 - 40 mL/m² |
| Spraying using a foam trigger (optional: wipe to spread the solution) | kitchens & canteen | 11 mL/m² |
| food processing industries |
| counter in a shop- /supermarket |
| Soaking or dipping in the solution | n.a. | up to 3 L |
| Wiping with prepared moist wipes | n.a. | bacteria, yeast, viruses: 5.0% | 5 min | 1.5m² |
*Application rate: Amount of liquid to take the surface fully wet during the contact time
