Ce produit est un produit biocide affecté en circuit restreint Ce produit ne peut être acheté que par un utilisateur enregistré selon l'article 41 de l’arrêté royal du 4 avril 2019. Veuillez utiliser les équipements de protection individuelle tels qu'indiqué dans la fiche de données de sécurité.

101105063-ClearKlens IPA VH1-0.9L-RGB.jpg
101105063-ClearKlens IPA VH1-0.9L-RGB.jpg

Caractéristiques:

  • ClearKlens IPA is a solution of 70% v/v Isopropyl alcohol and 30% water for injection (USP quality).
  • ClearKlens IPA is a ready to use product for the disinfection of work surfaces and process equipment in cleanrooms
  • ClearKlens IPA 900mL trigger spray is an antisuck back- bag in bottle delivery system to eliminate product contamination during use
  • ClearKlens IPA is a BPR supported pack and formulation

Avantages:

  • Ready to use
  • 0.2µm filtered
  • Gamma irradiated/aseptically filled and double bagged
  • Detex labelled for proof of irradiation
  • Double bagged for easy transfer into the cleanroom
  • Odourless and Non tainting
  • Effective broad-spectrum activity

Mode d'emploi:

Clean and dry the surface before disinfection.

Spraying:
Spray the surface, wipe if necessary to spread the product. Make sure to wet the surface completely. Allow to take effect for at least 30 seconds. Used cloths must be disposed in a closed container.

  • Sterile trigger (bag in bottle): apply 16 sprays / m2 surface

Cloth:
Wet the cloth with the disinfectant and wipe the surface. Make sure to wet the surface completely. Allow to take effect for at least 30 seconds. In cleanrooms, the exact amount of required product can also be dispensed either using a low flow-rate spray lance or into a bucket via a system of pipes. Used cloths must be disposed in a closed container.

Mopping:
Wet the mop with the disinfectant and mop the surface. Make sure to wet the surface completely. Allow to take effect for at least 30 seconds. Used mops must be stored in a closed container.

Non-porous Glove disinfection:

Automatic dosing:

Apply 3 mL of the product directly onto clean gloved hands, distribute evenly and make sure to wet the surface completely. Allow to take effect for at least 30 seconds.

Manual dosing:

Spray 3 mL of the product directly onto clean gloved hands, distribute evenly and make sure to wet the surface completely. Allow to take effect for at least 30 seconds. Number of applications per type of packaging, necessary to apply 3 mL product onto clean gloved hands:

- Trigger spray pouch: apply 3 sprays of the product to two hands
- Sterile trigger (bag in bottle): apply 3 sprays of the product to two hands


Candidature:

Des produits qui vous intéressent

Produits similaires

Aucun produit associé

Consommables associés

Aucun produit associé