Good Sense Dispenser Plus is a system which automatically sprays high quality air care products via one compact, modern and lockable dispenser. It is easily fitted to any surface, either with integral self-adhesive pads or with the screws provided. In combination with unique Good Sense fragrance cartridges it ensure every room smells fresh and inviting for an unforgettable experience - all day, every day.

9299593-Good Sense Dispenser Plus.jpg
9299593-Good Sense Dispenser Plus.jpg
9299593-Good Sense Dispenser Plus.jpg

Caractéristiques:

  • Easy to install, mounting hardware are provided with each device
  • Battery powered
  • Adjustable settings, easy maintainance, and a keyless locking system
  • Photocell feature allows the dispenser to simply go into a sleep mode whenever the room is put into darkness
  • Choice of fragrance varieties for effective malodour removal containing patented Odour Neutralising Technology (O.N.T.)

Avantages:

  • Easily fits to any surface, either with integral self-adhesive pads or with the screws provided and supplied with 2 AA batteries, lasting up to 18 months
  • Flexibility to set spray intervals to every 30 min, 1, 2 or 3 hours and due to the photocell feature no more wasted sprays over night or when the area is not used.
  • LED light gives a clear indication when fragrance cartridges or batteries need to change, reducing maintenance time
  • Keyless locking system to ensure that the cartridge is well protected without the risk of lost keys
  • Use of fragrance cartridges incorporating Odour Neutralising Technology (O.N.T.) which doesn`t mask malodors but chemically destroys them to enhance the perception

Mode d'emploi:


Installation

  • Ensure the dispenser is at least mounted 15.24 cm below the ceiling
  • The odour control system is most effective when located in high traffic areas e.g. near urinals or toilets. 
  • Always follow the mounting instruction provided with the dispenser
Insert Cartridge
  • Insert the tip of the refill cartridge into the nozzle inside the dispenser cover
  • Slide the base of the refill cartridge slightly sideways and twist it to align into the slot
  • Adjust the switch to the selected spray interval 
  • Optional, turn on the photocell by moving the switch to the “on” position
  • Press the reset button
  • Place the cover back on the backplate
Maintenance
  • Change the refill cartridge when the LED light flashes red
  • Unlock the dispenser cover
  • Lift the cover up and off the wall unit
  • Gently lift the old cartridge upwards and slide its base out first
  • Insert a new cartridge as described above 
Change batteries when the LED stops flashing. Follow the instruction as provided with the user manual

Candidature:

      Accessoires

      Aucun produit associé

      Consommables associés

      Aucun produit associé