• Formule à base aqueuse, sans odeur
• Imprègne efficacement les pierres et céramiques poreuses
• Maintient l’aspect naturel du sol
• Simple d’application, ne nécessite pas d’équipement particulier

• Protège le sol tout en conservant son aspect d’origine
• Empêche la pénétration de l’eau et des graisses, retarde la pénétration des taches, tout en laissant le sol respirer.
• Facilite le nettoyage

1. Treat only deep cleaned and dry floors.
2. Shake well before use.
3. Working in 2-3 m² areas, evenly distribute the product on the stone floor using either a clean mop, a polish applicator or single disc machine (<200rpm) with red pad to completely wet the surface.
4. Keep wet for 3-5 minutes and do not allow to dry on floor surface during that time (eventually add extra product). Remove excess product if needed.
5. Repeat the treatment, if necessary, after 1-3 hours when dry to touch.

Product coverage depends on the porosity of the floor. Consumption can vary drastically. Check floor porosity with water prior to application in order to adapt consumption of product.
Typical consumption is 10 to 40 ml/m² per application (1 L of product will cover 25-100 m²).
In some cases (dark polished surfaces), a white layer of excess product will be visible on the floor. In that case, remove excess product using a clean dry towel or squeegee. If floor is dry, add or spray water on top of the surface and buff dry using a dry towel or single disc machine (<200 rpm) and red pad, moving at all times. Floors may be slippery before excess product is wiped away and floor is completely dry. Once dry, the treatment does not modify the safety characteristics of the floor.