Cechy

• zdezynfekowane powierzchnie nie wymagają płukania;
• wysoka skuteczność wobec różnorodnych mikroorganizmów;
• uniwersalny w zastosowaniu, postać gotowa do użycia;
• natychmiastowy i długotrwały efekt dezynfekcji;

• Ready-to-use (no dilution required)
• Effective broad-spectrum activity
• Non foaming
• Suitable for use in moisture sensitive areas
• Readily evaporates leaving no residues
• No Rinse required

Trigger spray
Use up to 10 times per day
Can be used in areas at room temperature or at low temperature of 4°C (cold storage rooms)
Thoroughly clean and rinse the surface, if needed. Remove excess water from the surface before disinfection, if appropriate. Spray on cleaned surface (25 ml/m2) and make sure to wet the surface completely. Allow to take effect for the appropriate contact time. Let air dry.
Pressurised spraying
Thoroughly clean and rinse the surface. Remove excess water from the surface before disinfection, if appropriate. Spray on cleaned surface (50ml/m2) and make sure to wet the surface completely. Allow to take effect for the appropriate contact time. Let air dry.
End of shift disinfection: Once per day
Mid-shift disinfection: Up to 3 times per day
Container opening disinfection
Automated spraying on container opening with valve (1 - 10 ml/ container opening). Make sure to wet the surface completely. Allow to take effect for the appropriate contact time. Let air dry.
Up to 600 containers per hour
Veterinary practices
Spray on surface (25 ml/m2) and make sure to wet the surface completely. Allow to take effect for the appropriate contact time. Let air dry.
Use up to 10 times a day. Use at room temperature.
Ensure that the application is carried out in areas with a minimum ventilation of 5 air changes per hour.
 
N.B. Avoid spraying near to motors or other unprotected electrical equipment. Avoid aerosol formation. Do not spray onto hot surfaces and avoid spraying near ignition sources (open flames, etc).