TASKI Jontec Lenio jest woskowym preparatem do konserwacji i czyszczenia podłóg drewnianych zaimpregnowanych i niezaimpregnowanych. Dzięki specjaInej mieszaninie wosków, konserwantów i związków powierzchniowo czynnych preparat szybko i skutecznie usuwa zanieczyszczenia, konserwuje myte powierzchnie oraz tworzy na nich błyszczącą, antypoślizgową powłokę ochronną. Preparat nie zawiera rozpuszczalników.

7513202-TASKI-Jontec-Lenio-F5b-5L-AI105431-18W39-CMYK-20x20cm.jpg
7513202-TASKI-Jontec-Lenio-F5b-5L-AI105431-18W39-CMYK-20x20cm.jpg

Funkcje:

Cechy

  • szybko i skutecznie usuwa zanieczyszczenia z mytych powierzchni;
  • tworzy na mytych podłogach powłokę ochronną - chroni podłogi przed szybkim niszczeniem;
  • czyszczone podłogi posiadają jedwabisty połysk;
  • sprzęt myjący jest łatwy do wypłukania z resztek preparatu;

Benefity:

  • Protect floors against humidity in the grouts (especially raw and prevarnished parquets) and from premature wear
  • Builds a safe to walk on and attractive silk-like protection
  • Environmentally responsible and easy application (applicators/pads are easily rinsed with water)
  • Leaves a pleasant, fresh fragrance
  • Neutralises malodour molecules and therefore enhances the perfume effect

Instrukcje użytkowania:

Shake well before use. Depending on floor traffic, the first use of the product may require several spray and buffing/densifying cycles in the beginning; cycle intervals can later be extended. Apply watery cleaning solutions very sparingly and always immediately pick up/wet vacuum. Full surface cleaning/maintenance:

  1. For sealed wood, add the product into the spray device of a single disc machine, equipped with red pad, and spray clean the floor. For unsealed wood apply one thin coat with a polish applicator.
  2. Allow to dry, then immediately buff.
  3. Unsealed wood floors may require a second coat (mat in between the 2 coats).
  4. Allow to dry completely before applying additional coats.
  5. After the floors has dried, buff the entire area with a white or red pad to densify the film.
Spray cleaning:
  1. Add the product into the spray device of a single disc machine, equipped with an appropriate pad, and spray clean the floor.
  2. After a short drying time, buff the whole surface for a more uniform appearance/gloss level.
  3. Stripping: Spray clean the surface with TASKI Jontec Solve and a single disc machine, equipped with a blue pad.
Spot cleaning/maintenance:
  1. Add the product into the spray device of a single disc machine, equipped with an appropriate pad, and spray clean the floor by spraying only on spots/soiled areas.
  2. After a short drying time, buff the whole surface for a more uniform appearance/gloss level.

Aplikacja:

Podobne produkty

Brak powiązanych produktów

Powiązane materiały eksploatacyjne

Brak powiązanych produktów