• combination sealer and finish that dries quickly and shines without buffing

READ AND UNDERSTAND LABEL AND SAFETY DATA SHEET (SDS) BEFORE USE. Blockade areas to be stripped or _nished. Floors will be very slippery until dry. If necessary, remove old _nish using a _oor stripper. COATING 1. Apply 2-3 uniform coats using a clean mop. Apply additional coats until desired gloss is obtained. 2. Allow 30-45 minutes drying time between coats. Temperature, humidity, and ventilation may affect drying time. Allow _nish to cure for 24 hours before burnishing. BURNISHING 1. Dust mop or sweep. 2. Clean the _oor with mop or automatic scrubber using a cleaner according to label directions. 3. Burnish using appropriate pads. RECOATING 1. Dust mop or sweep. 2. Clean the _oor with mop or automatic scrubber using a cleaner according to label directions. 3. Blockade area and apply 1-2 uniform coats of _nish using a clean mop. 4. Allow _nish to cure for 24 hours before burnishing. FOR BEST RESULTS: Do not dilute. Do not use on surfaces colder than 50° F (10° C). To avoid contamination, do not return unused product to original container. NOTE: Floors will be slippery when wet or contaminated with foreign materials. Promptly clean-up spills and foreign materials. Not intended for use in outdoor areas. Meets ASTM D-2047 requirement for slip resistance. Keep from freezing.